Step by Step

TIMBAR How to Use

Before you fire it up, let's make sure everything's dialled in. Follow the steps below, and you'll be ready to cut in no time.

Jump to a section
Compatibility Check Installation Guide Before You Cut Proper Cutting Techniques Chain Replacement FAQs

START HERE

Step 1
Check Compatibility

Before installing the TIMBAR™, confirm your pole saw is compatible. TIMBAR™ is designed to fit most major electric and gas-powered pole saw brands, but compatibility varies by model and bar length.

To check: locate your pole saw's brand and model number (usually found on the housing label), then enter the details below in our Compatibility Checker (coming soon) to confirm fitment before purchase. If you're unsure, contact us and we'll help you find the right setup.

Step 2
Installation Guide

Installing the TIMBAR™ takes less than 10 minutes and requires no special tools. Watch the video for a full walkthrough, or refer to the Quick Guide below. Make sure to read and follow all safety instructions.

If you run into any issues, contact us and we'd be happy to assist.

Quick Guide
Step 3
Before You Cut

Before every use, run through this quick pre-use check to make sure your TIMBAR™ assembly is safe and ready to work. It takes less than two minutes and can save you a lot of trouble in the field.

  • Remove the power source — always disconnect before inspecting.
  • Check all bolts — ensure every fastener is snugged up tight.
  • Check chain tension — adjust if needed before starting.
  • Check oil levels — confirm there is sufficient bar and chain oil.
  • Inspect the torque arm and bar — look for damage, debris, or anything jammed inside the assembly. Everything should move freely with no obstructions.
Step 4
Proper Cutting Techniques

With everything checked and installed, you're ready to cut. Follow these techniques to get the most out of every cut.

  • Find stable footing — before you start, make sure you're standing on solid, level ground with a clear stance.
  • Position yourself to the side — never stand directly under the branch. Stand to the side so falling debris doesn't come down on you.
  • Apply a smooth, gentle forward motion — don't force it. Let the torque arm assembly do the work and pull the branch into the chain naturally.
  • Throttle down between cuts — every time you complete a cut, throttle down before repositioning. Don't move with the saw at full speed.
  • Maintain steady forward pressure — consistent, even pressure gives you cleaner cuts and reduces the chance of the chain binding or skipping.
Maintenance
Chain Replacement

Replacing your chain is quick and straightforward. Always disconnect the power source first, then follow these steps.

  • Remove power source and detach the TIMBAR™ arm
  • Remove sprocket gear cover
  • Slacken chain, then remove bar and chain
  • Slide chain off the TIMBAR™ arm
  • Install new chain — teeth facing the correct direction (see quick sstart guide for more details)
  • Seat chain properly in the bar grooves and set chain tension
  • Replace sprocket cover tighten bar nut

Got questions?

If you don't see your question below, don't hesitate to contact us.

TIMBAR™ is a performance upgrade for your pole saw that helps you cut faster with less effort. It uses a Patents Pending spring-assisted torque arm that feeds the saw into the cut. This helps maintain consistent pressure on the chain, improves control, and reduces the effort required from the operator.
TIMBAR™ works with many major electric and gas-powered pole saw brands. Compatibility varies by model. Please consult the compatibility checker.
Maintain TIMBAR™ the same way you maintain your pole saw. Check chain tension, lubrication, and fasteners before use. The Torque Arm does not change how your saw is lubricated or tensioned. Refer to the instruction manual for full maintenance guidelines.
The TIMBAR™ team is here to help. Feel free to contact us with information about your needs and we'll guide you to the best setup for your situation.
Yes, shipping is applied at checkout and varies by country. Shipping rates and delivery timelines are calculated at checkout based on your location.
We offer a 30-day return policy from the date of delivery. To be eligible, the item must be:
  • In its original condition
  • Unused and uninstalled
  • Returned in original packaging

To start a return, please contact us with your order number and reason for return. Return shipping costs may apply unless the item is defective or damaged upon arrival.